Dunhill Fir Christmas Tree: Honest 7.5 ft Review (2026)

Quick answer

The Dunhill Fir Christmas tree from National Tree Company is a full, classic-shaped 7.5 ft artificial tree with a wide 59 inch base, 2,514 branch tips, hinged branches and pre-strung LED lights with 10 light functions. It suits living rooms with 8 to 9 ft ceilings and enough floor space for a wide tree. Plan 45 to 60 minutes to shape the branches, and note that it weighs about 45 lb, so set it up with a helper.

Disclosure: As an Amazon Associate I earn from qualifying purchases. If you buy through our links we may earn a small commission at no extra cost to you. Learn more.

Our top pick:

National Tree Company 7.5 ft Pre-Lit Dunhill Fir

Best for: Living rooms with 8 to 9 ft ceilings that want a full, traditional pre-lit tree

Check current price on Amazon →

Dunhill fir Christmas tree look: full 7.5 ft artificial fir with gold and red ornaments in a bright living room

If you want one artificial tree that looks right in a family room for the next several Christmases, the Dunhill Fir Christmas tree is one of the most familiar names you will find. It is the traditional, cone-shaped fir most people picture when they think of a Christmas tree: wide at the bottom, dense through the middle and tapered to a neat point for a star or angel.

This review looks at the 7.5 ft pre-lit version from National Tree Company. We cover what the listing actually says, the ceiling and floor space you need, how to set it up and shape it, what to do if a section of lights goes dark, and how it compares with slim, flocked and unlit trees.

National Tree Company Dunhill Fir at a glance

The National Tree Company Dunhill Fir is a full-profile artificial fir with PVC needles, hinged branches that drop into place, and a metal stand. This listing is the 7.5 ft pre-lit model, strung with LED lights that offer 10 light functions, plus a foot pedal for switching the tree on and off without crawling under the branches. National Tree Company also sells the same Dunhill Fir design in smaller and taller sizes, but 7.5 ft is the size that fits most American living rooms. If your ceiling is 10 ft or higher, see how the 9 ft Dunhill Fir compares in our roundup of the best 9 ft Christmas trees.

Pick	Best for	Why it stands out
National Tree Company 7.5 ft Pre-Lit Dunhill Fir Best Classic Full Pre-Lit Tree	Living rooms and family rooms with 8 to 9 ft ceilings	2,514 tips, 59 inch base, hinged branches, LED lights with 10 functions, foot pedal	See photos

Our verdict on this Dunhill Fir Christmas tree

For a traditional look with as little setup work as possible, this Dunhill Fir Christmas tree is a sensible choice. The lights are already on the branches, the branches are hinged so they fall into place, and the wide 59 inch base gives the classic full shape that holds a lot of ornaments. The trade-offs are size and weight: it needs real floor space, the box is heavy, and like any hinged tree it only looks its best after you spend time fluffing each tip.

1. National Tree Company 7.5 ft Pre-Lit Dunhill Fir: Best Classic Full Pre-Lit Tree

Best Classic Full Pre-Lit Tree

The shape is the main reason to buy it. A 59 inch base on a 7.5 ft tree is a full, generous profile, so the tree looks substantial in a corner or in front of a window and leaves plenty of branch depth for ornaments, ribbon and garland. The listing describes hundreds of individually crafted branch tips built to look and feel lifelike, and 2,514 tips is a solid count for this height.

The second reason is convenience. The tree comes pre-strung with LED lights, the listing describes a 10-function controller (steady, twinkle, flash and fade style settings) and a foot pedal, and PowerConnect routes power through the center pole so you plug sections together instead of hunting for plugs in the branches. It also includes a metal stand and a 5-year manufacturer warranty.

What we like

Full, classic fir shape with a wide 59 inch base
Pre-lit LED lights with 10 light functions and a foot pedal
Hinged branches and PowerConnect for quicker setup
Metal stand included; 5-year manufacturer warranty

Keep in mind

About 45 lb, so carrying and lifting sections is a two-person job
Needs 45 to 60 minutes of shaping to look full
Too wide for tight corners and narrow apartments

Best for: Living rooms with 8 to 9 ft ceilings that want a full, traditional pre-lit tree

See photos & price on Amazon →

Dunhill Fir Christmas tree specs from the listing

Everything in this table comes from the Amazon listing for the 7.5 ft pre-lit model (model DUH-330LD-75S):

Spec	Listing detail
Brand	National Tree Company
Model	DUH-330LD-75S
Height	7.5 ft (item dimensions list 90 inches)
Base diameter	59 inches
Branch tips	2,514
Needle material	PVC; listed as hypo-allergenic and fire-resistant
Branches	Hinged, pre-attached; drop down for setup, fold up for storage
Lights	Pre-strung LED lights, 10 light functions
Extras	PowerConnect through the center pole, foot pedal switch
Stand	Metal stand included
Item weight	About 45.2 lb
Warranty	5-year manufacturer warranty

What 2,514 tips means in real life

Tip count is the closest thing artificial trees have to a fullness rating. More tips on the same height usually means fewer gaps where you can see the center pole. For a 7.5 ft tree with a wide base, a count in the mid-2,000s gives a full look once the tips are spread out properly. If tips are left bunched together from the box, even a high-count tree looks thin, which is why shaping matters so much on a Dunhill Fir Christmas tree.

A note on the lights

The listing title describes 700 LED lights, while parts of the description mention dual color bulbs that switch between white and multicolor. Amazon listings for trees often bundle several light options, so open the product page and confirm the light color and bulb count on the exact option you select before you order. Either way, the lights on the Dunhill Fir Christmas tree are LED, which runs cooler and uses far less power than old incandescent mini lights. The description also notes that the bulbs operate individually, so one cracked or missing bulb should not take down the whole string.

Who should buy this Dunhill Fir Christmas tree (and who should skip it)

A good fit if you:

Have a living room or family room with an 8 to 9 ft ceiling
Want a full, traditional tree that holds a lot of ornaments
Are tired of stringing lights every December
Want to keep the same tree for several seasons

Skip it if you:

Have a small apartment, a narrow corner or a walkway next to the tree spot; a slim or pencil tree will fit better
Have ceilings under 8 ft
Prefer to choose your own light color, spacing and bulb style; an unlit tree gives you more control
Cannot get help carrying a heavy box and lifting the top sections

Is a 7.5 ft pre lit Christmas tree the right size?

A 7.5 ft pre lit Christmas tree is the most common choice for US homes because it suits the standard 8 ft ceiling. The listing gives the item height as 90 inches, so on a 96 inch ceiling you have about 6 inches left for a topper. That works for a low-profile star or bow, but a tall angel or a big starburst topper may hit the ceiling. With a 9 ft ceiling you have plenty of room for the Dunhill Fir Christmas tree and almost any topper.

Width matters just as much. This tree is 59 inches across at the bottom, close to 5 ft. Allow at least 6 to 7 ft of open floor so people can walk past without brushing branches, and keep it about 3 ft from fireplaces, radiators and space heaters. For a deeper breakdown by ceiling height and room size, see our guide to what size Christmas tree you need.

Ceiling height	Does a 7.5 ft pre lit Christmas tree fit?	Topper room
Under 8 ft	No, choose 6 to 6.5 ft	None
8 ft	Yes	About 6 inches; use a low topper
9 ft	Yes, ideal	About 18 inches
10 ft and up	Yes, but it may look small; consider 9 ft	Plenty

7.5 ft pre lit Christmas tree glowing with warm white lights in a cozy living room at night

How to set up a pre lit Christmas tree (step by step)

Knowing how to set up a pre lit Christmas tree properly saves you from dark sections and flat-looking branches later. These steps follow the hinged, PowerConnect style used on this Dunhill Fir Christmas tree:

Pick and measure the spot. Clear a circle about 6 ft wide near an outlet, away from heat sources and doorways.
Open the stand fully. Set the metal stand on a flat floor and tighten it so it does not wobble. Put a tree skirt or mat underneath first if you want to protect hardwood.
Insert the bottom section. Seat the pole all the way into the stand. Let the hinged branches fall down on their own.
Stack the next sections. Lower each section straight down so the pole connectors meet cleanly. With PowerConnect, power passes through the pole, so a section that is not fully seated may not light.
Test the lights before you shape. Plug in, press the foot pedal, and cycle through the light functions. It is far easier to fix a dark section now than after ornaments are on.
Shape from the bottom up. Work one branch at a time, starting near the pole and moving out (details below).
Add the topper, then ribbon, then ornaments. Start with large ornaments deep in the branches and finish with smaller ones near the tips.

That is the whole method for how to set up a pre lit Christmas tree: level stand, fully seated sections, a light test before shaping, and patience with the branches.

Shaping the branches: plan 45 to 60 minutes

The listing recommends setting aside 45 to 60 minutes after assembly to shape the tree by peeling back the branches and pulling the tips apart. Shaping is where a Dunhill Fir Christmas tree goes from flat to full. Wear gloves and long sleeves, since PVC tips can scratch. On each branch, spread the tips closest to the pole in an upward and outward fan, then fan the middle tips side to side, and point the end tip forward. Our full guide on how to fluff an artificial Christmas tree walks through the technique, and these tricks on how to make a Christmas tree look fuller help fill any gaps that remain.

See photos & price on Amazon →

National Tree Company Christmas tree lights not working? Try these fixes

If you find your National Tree Company Christmas tree lights not working after setup, the cause is usually simple. Unplug the tree before handling bulbs or connectors, then work through this list in order:

Check the outlet and foot pedal. Plug a lamp into the same outlet to confirm it has power, reset any GFCI outlet, and press the foot pedal firmly once.
Reseat the sections. On a PowerConnect tree, power flows through the pole. If only the top or middle is dark, lift that section out and set it back in so the connector seats fully and straight.
Cycle the light functions. If the tree is on a fade or flash setting, it can look like some lights are out. Switch back to a steady setting to check.
Look for loose or cracked bulbs. The listing says the bulbs operate individually, so one bad bulb should only affect that bulb. Gently push any loose bulb back into its socket.
Check the controller and plugs. Make sure the plug between the bottom section and the power cord is pushed in completely and has not come loose during shaping.
Use the warranty. If a whole section stays dark, contact National Tree Company with your model number; the listing includes a 5-year manufacturer warranty.

Never use a damaged cord, and turn the lights off when you leave home or go to bed. The NFPA’s winter holiday guidance is a good refresher on tree and light safety.

Dunhill Fir vs other 7.5 ft tree types

The Dunhill Fir Christmas tree is a full-profile, pre-lit PVC tree. Here is how that style compares with the other common types you will see at 7.5 ft:

Tree type	Look	Best for	Trade-off
Full pre-lit fir (this Dunhill Fir)	Wide, classic cone, very full	Living rooms with floor space	Heavy and wide; lights are fixed
Slim or pencil pre-lit tree	Narrow, tall, modern	Apartments, corners, entryways	Holds fewer ornaments
Unlit full tree	Classic, your choice of lights	People who love custom lighting	You string lights every year
Flocked pre-lit tree	Snowy, white-dusted branches	Winter wonderland themes	Flocking can shed
PE-tip “real touch” tree	Molded, lifelike needles	Close-up realism	Often heavier and pricier

Still deciding between lights included or not? Our pre-lit vs unlit Christmas tree comparison covers the long-term pros and cons, and our roundup of the best pre-lit Christmas trees and our artificial Christmas tree buying guide show what else to consider.

Care, storage and what to check before buying

Care and storage

At the end of the season, unplug the tree, remove ornaments and ribbon, and fold the hinged branches up toward the pole section by section. Wrap each section loosely, keep the light connectors dry, and store the Dunhill Fir Christmas tree in a cool, dry place instead of a hot attic, where heat can make PVC needles brittle and stress the wiring. A tall tree storage bag or box helps the tips keep their shape. See our tips on how to store an artificial Christmas tree for more.

What to check before buying

Measure ceiling height; 90 inches of tree needs at least an 8 ft ceiling
Measure floor space; the Dunhill Fir Christmas tree base is 59 inches wide
Confirm the light color and bulb count on the option you select
Plan for help: the tree weighs about 45 lb
Block out an hour for shaping the branches
Choose a spot within reach of an outlet so you do not need a long extension cord

See photos & price on Amazon →

How we researched this Dunhill Fir Christmas tree

We did not test this tree hands-on. We reviewed the Amazon listing, including the stated height, base width, tip count, light features, weight and warranty, and compared the design with other common artificial tree types. We added general sizing, setup, troubleshooting and holiday safety guidance. We update this post when the listing changes.

Helpful resources: NFPA: Winter holiday safety and NFPA: Electrical safety in the home.

Dunhill Fir Christmas tree: frequently asked questions

Is the Dunhill Fir Christmas tree worth it?

For most families with a standard 8 to 9 ft ceiling, yes. The Dunhill Fir Christmas tree gives you a full, classic shape, hinged branches and pre-strung LED lights with 10 functions, so setup is mostly stacking and shaping. Skip it if your space is narrow or you prefer to pick your own lights.

How tall and wide is the National Tree Company Dunhill Fir?

The 7.5 ft pre-lit National Tree Company Dunhill Fir is listed at 90 inches tall with a 59 inch base diameter and 2,514 branch tips. Leave 6 to 7 ft of floor space around it.

Will a 7.5 ft pre lit Christmas tree fit under an 8 ft ceiling?

Yes. A 7.5 ft pre lit Christmas tree fits under an 8 ft ceiling with roughly 6 inches to spare, so choose a low topper such as a small star or bow. A 9 ft ceiling gives much more room.

How do you set up a pre lit Christmas tree?

To set up a pre lit Christmas tree, open the stand, seat the bottom section, stack each section so the pole connectors meet fully, plug in and test the lights, then shape every branch from the bottom up. Add ornaments only after the lights work.

Why are my National Tree Company Christmas tree lights not working?

With National Tree Company Christmas tree lights not working, first check the outlet and foot pedal, then reseat each tree section so the PowerConnect pole connectors touch, switch to a steady light setting, and push in loose bulbs. If a section stays dark, contact the maker under the 5-year warranty.